Sigelei Zmax V5

Material: 304 stainless steel, black tarnish
Thread: 510 and ego thread
Battery: 18350, 18500, 18650
Weight: 163g
Dimension: 106(131)*23mm
Warranty and Guarantee: 12 months

This is mod + mobile charger only. Choose your batteries (18350 or 18650) from here.

Only one button, it can test resistence, battery voltage, work voltage and power.

When you put battery in, you see Sigelei logo on display. Press five times continuously to start on.

Sigelei Zmax V5 has 9 menus:

1. when you press three times continuously, you enter to the first menu which adjust device on/off
• The device can be disabled to prevent from unwanted firing by selecting ‘OUT OFF’. When ‘OUT ON’ is selected then the device will work normally and atomizer will fire.
2. pressing four times continuously; adjust voltage (power) rise up.0.1v rate
• Increase voltage/wattage
• To increase the Voltage from 3.0V to 6.0V in 0.1 Volt increments, or power from 3.0W to 15.0W in 0.5 Watt increments.
  (Select Voltage or Wattage setting in menu 7)
3. pressing five times continuously; adjust voltage (power) decline down. -0.1v rate
• Reduce Voltage/Wattage
• To reduce the Voltage from 6.0V to 3.0V in 0.1 Volt decrements, or power from 15.0W to 3.0W in 0.5 Watt decrements.
  (Select Voltage or Wattage setting in menu 7)
4. pressing six times continuously; Battery level indicator.
• To check the battery voltage. A fully charged battery will have 4.2V.
• We recommend charging the battery when it falls to 3.3V.
• Zmax will switch off automatically when the battery level reaches 3.1V.
5. pressing seven times continuously; choice voltage of smoking or power, check atomizer resistence and battery voltage
• To select what the display shows you while the button is pressed:
• Voltage: to display the output voltage
• Time: to display the time of each puff
• Resistance: to display the resistance of atomizer
• Current: to display the working current
6. pressing eight times continuously; Switch LCD on/off
• When ‘ON’ is selected, the LCD will display your settings when the button is pressed.
• When ‘OFF’ is selected, the LCD will not display your settings when the button is pressed.
7. pressing nine times continuously; Select VV or VW
• To choose between variable voltage and variable wattage.
8. pressing ten times continuously; choice what way to test working voltage.
• Select RMS or MEAN voltage.
9. New function to charge the mobile phone.
• Connect the mobile phone with the ZMAX V5 with a USB charger. Choose ‘Mobile OUT ON’, press for 10 seconds and it will charge the mobile In this period, the LCD will show ‘Warning!’ and ‘No smoking’.
• To stop charging, press for another 10 seconds and separate the mobile and ZMAX V5.
• Please make sure you have set Mobile Out OFF after charging. Only in this mode you can smoke.
• !!! You charge the phone only when using one battery !!!

 Operation of Zmax V5
-Press 5 times continuously to turn on the mod and take out the battery to turn off the device.
-Press 3 times to browse the menu when the screen has shut down.
-Choose the menu and wait 2 seconds to enter it; then set the item and wait for 2 seconds to save your setting.
-If there is no operation in 2 seconds, you will exit the menu automatically.

NOTES
1. Clean the thread after using in case of rusting and corrosion.
2. Do not reverse the battery in the tube.
3. Turn off ZMAX when not using.
4. Do not use the protected batteries.
5. It's better not to put Zmax in your pocket. A hanger is recommended.
                                                                                         

Error-codes:

• Short=short circuit of the atomizer
• Low-V= under voltage
• HHH= over voltage

*When the resistance of the atomizer is below 1.2O, the Zmax will not work.